Article 41855 of comp.sys.cbm: Xref: undergrad.math.uwaterloo.ca comp.sys.cbm:41855 Newsgroups: comp.sys.cbm Path: undergrad.math.uwaterloo.ca!csbruce From: csbruce@ccnga.uwaterloo.ca (Craig Bruce) Subject: Re: Questions About Power And Message-ID: Sender: news@undergrad.math.uwaterloo.ca (system PRIVILEGED account) Nntp-Posting-Host: ccnga.uwaterloo.ca Organization: University of Waterloo, Canada (eh!) Date: Mon, 4 Sep 1995 04:44:18 GMT Dean.Leuty@cee-64.gigo.com (Dean Leuty) writes: >Hi Scott.Hanak, > > SH> I got a RamLink here and every so often > SH> my data gets corrupted. I got a > SH> battery backup, but... Any ideas, solutions, etc... > >Sounds Like you might need the Timing Jumper... Contact CMD @ >1-800-638-3263. I think they're, like $10.00 + S&H. I had the same >problem CONSTANTLY until I installed it. I had this problem too... you should try giving your expansion-port connector and your RAMLink connector a good cleaning. According to an article in Commodore World, 90% of cases like this are caused by dirty contacts. Keep on Hackin'! -Craig Bruce csbruce@ccnga.uwaterloo.ca "Ladies and gentlemen, Craig has left the building."