Article 42003 of comp.sys.cbm: Xref: undergrad.math.uwaterloo.ca comp.sys.cbm:42003 Newsgroups: comp.sys.cbm Path: undergrad.math.uwaterloo.ca!csbruce From: csbruce@ccnga.uwaterloo.ca (Craig Bruce) Subject: Re: Ramlink Message-ID: Sender: news@undergrad.math.uwaterloo.ca (system PRIVILEGED account) Nntp-Posting-Host: ccnga.uwaterloo.ca Organization: University of Waterloo, Canada (eh!) References: Date: Fri, 8 Sep 1995 14:55:12 GMT Paul Fisher writes: >How can I get my AUTOEXE files to run under RamLinks Reboot process? (short of >manually running each and every one of them my self (keybord patch,BSW patch >(for swedish characters), CMD time,.. etc...) There should be a program called "autofile editor" included on your RAMLink Utilities disk. It allows you to set the one basic/ml program to run when starting up in either C128 or C64 mode. >Can I use a DACC partion (other than #31 for GEOS) as an REU? At least with >ACE? (I have READ AND RE-READ the Docs but still have no clue as to how to >get both GEOS and other programs to use seperate DACC partitions) With ACE, you just set partition #31 of your RAMLink to be DACC and be named "rl-ram". You also have to set the device number of your RAMLink in the system configuration. You can also set the partition number to be other than #31 and the name to be other than "rl-ram" with the configuration program. The only thing that I have ever heard about GEOS is that you set partition #31 to be DACC and be named "geos" to use it. Keep on Hackin'! -Craig Bruce csbruce@ccnga.uwaterloo.ca "Left-Wing, adj.: Referring to the idea that all social problems can be fixed by the suitable application of artificial force."