Article 42252 of comp.sys.cbm:
Xref: undergrad.math.uwaterloo.ca comp.sys.cbm:42252
Newsgroups: comp.sys.cbm
Path: undergrad.math.uwaterloo.ca!csbruce
From: csbruce@ccnga.uwaterloo.ca (Craig Bruce)
Subject: Re: RAMLINK
Sender: news@undergrad.math.uwaterloo.ca (news spool owner)
Message-ID: <DEws1z.H2J@undergrad.math.uwaterloo.ca>
Date: Thu, 14 Sep 1995 18:44:23 GMT
References: <ftn_2.200.111.0_05823ab0_Paul.Fisher@ferrari.ct.se>
Nntp-Posting-Host: ccnga.uwaterloo.ca
Organization: University of Waterloo, Canada (eh!)

Paul Fisher <paul.fisher@ferrari.ct.se> writes:

>cb>With ACE, you just set partition #31 of your RAMLink to be DACC and be     
>cb>named "rl-ram".  You also have to set the device number of your RAMLink in 
>cb>the system configuration.  You can also set the partition number to be     
>cb>other than #31 and the name to be other than "rl-ram" with the             
>cb>configuration program.
 
>    The question was. (suposed to be) can I use one DACC partion for GEOS AND
>another DACC partition for ACE? (or possibly a third program too??)

You create DACC partition #31 and name it "geos".  Then you create, say,
partition #28 and call it "rl-ram".  Then go into the "config.edit" program
and change the rl-ram setting to use partition #28 and set the RL device
number.  Presto.

Keep on Hackin'!

-Craig Bruce
csbruce@ccnga.uwaterloo.ca
"Now is the time for all good men to run like hell."